Print Page | Close Window

PCM 40A O-RING R047186

Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48618
Printed Date: November-15-2024 at 1:48am


Topic: PCM 40A O-RING R047186
Posted By: jhersey29
Subject: PCM 40A O-RING R047186
Date Posted: April-29-2020 at 1:30am
Does anyone know the measurement of the PCM O-Ring R047186? It is part number 105 in the 40A transmission. Page T2-1 of the transmission manual. The transmission requires 2. Looking for measurements of a new one or possible cross reference to a part I could get at Napa, Autozone, OReilly's, Advanced Auto, etc.

I ordered the main cover seal and large o-ring but didn't notice these on the diagram when pulling the cover to fix a transmission leak. Seems silly not to replace them while I have this front cover off but don't want to wait for parts to ship from a dealer and hope I can find something local. The old ones look like squared o-rings but they might just be flat from being in a transmission for 21+ years.

Thanks


Replies:
Posted By: KENO
Date Posted: April-29-2020 at 8:54am
I'd probably call FFI marine this morning and ask him.

Being Italian made, I'd figure the original is a metric o ring

Here's his info from last year


Originally posted by FFImarine FFImarine wrote:

Hey guys! We have moved to a new location as of June 1st new address is
1669 w130th unit#403 hinckley oh 44233 are phone number is still the same.(330)273-8291. As always we will be here to answer any questions you guys might have day or night so please don’t hesitate to call. I’ve been working for this company for over 16 years and I’m proud to say that my hard work has payed off cause I Joe D’Amico am the new owner of fantastic finishes marine. Please spread the word for me guys and thank you for reading

Posted By: jhersey29
Date Posted: April-29-2020 at 1:13pm
Thanks SkiDim was kind enough to help me. I placed the original order from them.   6mm id x 10 mm od x 2 mm. I have to say SkiDim and NautiqueParts are both great shops. Wish we had a full service CC dealer in Denver. Hard to do when boating is a small segment and boatable water is minimal.

Posted By: FFImarine
Date Posted: May-13-2020 at 10:36pm
I have plenty in stock if you need them


Print Page | Close Window