Print Page | Close Window

Voltage issue Printed From: CorrectCraftFan.com Category: General Correct Craft Discussion Forum Name: General Discussion Forum Discription: Anything Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48699 Printed Date: March-06-2025 at 4:16am Topic: Voltage issue Posted By: esse77 Subject: Voltage issue Date Posted: May-18-2020 at 3:12pm 1989 ski nautique. Fresh rebuild, new battery, and was run in dyno with its distributor and coil. Issue I’m having in the boat is I have 12v everywhere I probe but only have 6v at the coil. The inline resistor isn’t an issue because I bypassed it and still have only 6v. Anyone have this issue before or have any advice? As far as I can tell also all my grounds are good because I’ve cleaned them. Replies: Posted By: desertskier Date Posted: May-18-2020 at 3:28pm Check it with the coil disconnected ------------- 92 SN - Owned since 93 99 Pro Air 89 SN - Went to live on a lake in Texas 75 Donzi 16 - Sold in 93

Print Page | Close Window