Oil Temp Sensor/ Oil Pan Bung Placement
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48707
Printed Date: November-27-2024 at 5:49am
Topic: Oil Temp Sensor/ Oil Pan Bung Placement
Posted By: DHMcFadin
Subject: Oil Temp Sensor/ Oil Pan Bung Placement
Date Posted: May-20-2020 at 12:02pm
Morning,
If anyone has a gt40 in a Ski/Sport/Air, I was wondering if I could get your opinion./ measurements. I want to add an oil temperature sensor to my Holley efi system. The thing is, I dont have the engine in the boat to check clearances. I would like to add the oil temp bung on the port side of the oil pan, down in the sump. Maybe right next to the remote oil drain bung? But I want to ensure there is enough clearance between the oil pan and all other components/mounts/etc. Could anyone take a look for me? The temp sensor would only protrude about 1" plus the harness plug.
Thanks,
Dom
-------------
1999 Longhorn Nautique
1995 Nautique Super Sport
https://www.instagram.com/longhorn_nautique/" rel="nofollow - https://www.instagram.com/longhorn_nautique/
|
Replies:
Posted By: Jonny Quest
Date Posted: May-20-2020 at 1:08pm
Based on my Ski (2001 year) there appears to be adequate room on the port side next to the oil drain.
JQ
-------------
Current
2003 Ski Nautique 206 Limited
Previous
2001 Ski Nautique Open Bow
1994 Ski Nautique Open Bow
Aqua skiing, ergo sum
|
Posted By: DHMcFadin
Date Posted: May-20-2020 at 1:22pm
Perfect, thank you!
-------------
1999 Longhorn Nautique
1995 Nautique Super Sport
https://www.instagram.com/longhorn_nautique/" rel="nofollow - https://www.instagram.com/longhorn_nautique/
|
|