water pump gasket
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48757
Printed Date: November-27-2024 at 5:23am
Topic: water pump gasket
Posted By: 99airwarrior
Subject: water pump gasket
Date Posted: May-29-2020 at 1:16am
| 1985 2001 351w I can not find the right water pump gasket. This is the pump to plate I purchase the whole fel-pro Timing chain cover gasket kit TCS45449 and it did not come with the above gasket. So I went on line and the only one that looked like it would work was a fel-pro 35214 had it shipped and it had one bolt hole off. So I know people at Ford,Napa,O"Reiley"s we looked through the computes, their was only 1 other gasket available and it was way off. So I purchased some gasket material and made my own. I should have taken a picture of the pump before mounting it so I could post it, I wanted to know if anyone else has seen this problem? I did check all years of 351w,400 block,ect. the pump gasket was the shape of a football just like the fel-pro 35214 the package say's 351w eng. 1979-86 Thank You |
Replies:
Posted By: Gary S
Date Posted: May-29-2020 at 1:36am
|
Isn't it the first one on this list ? - https://www.skidim.com/products.asp?dept=1108" rel="nofollow - link O'Reilly Auto https://www.oreillyauto.com/detail/b/fel-pro-3607/gaskets-25077/heat-transfer-and-climate-control-25079/water-pump-gasket-11353/b87fea63d709/fel-pro-water-pump-gasket/35019/4303265" rel="nofollow - link ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: 99airwarrior
Date Posted: May-29-2020 at 2:28am
| Gary that one is way off from my pump look at the fel-pro 35214 it looks just like the one in the picture except one bolt hole completely is off of the pump all the rest line up Joe |
Posted By: KENO
Date Posted: May-29-2020 at 9:51am
|
Hi Joe Here are a couple pictures First one is what your pump probably looks like with the cover removed. You can see the black gasket still stuck to the pump. It's a mid 80's bi directional pump. Second picture is a FelPro who's number is 35019 like Gary mentioned . If you lay that on the pump and trim it with your favorite razor knife where I drew in the silver lines, you end up with a gasket that fits.    |
Posted By: Jonny Quest
Date Posted: May-29-2020 at 1:40pm
|
KENO: I'm always amazed at the quantity and diversity of engine photos you have -- seemingly at your fingertips. You are the "Rainman" of the marinized SBF.  JQ ------------- Current 2003 Ski Nautique 206 Limited Previous 2001 Ski Nautique Open Bow 1994 Ski Nautique Open Bow Aqua skiing, ergo sum |
Posted By: 67 ski nat
Date Posted: May-29-2020 at 2:16pm
|
Quality auto parts store sell good gasket material too You could easily trace and make one |
Posted By: 99airwarrior
Date Posted: May-29-2020 at 2:48pm
| I Do not know how we missed it we pulled the gaskets and laid them on the pump. I must have made a mistake Thank You everyone for the help Joe |
Posted By: 99airwarrior
Date Posted: May-29-2020 at 5:20pm
| Keno Thank You for all effort with the exact pump picture Joe |
Posted By: KENO
Date Posted: May-29-2020 at 6:10pm
A quality reading job would have told you in the first post that Joe bought some material and made his own gasket It probably took a little longer than trimming the one shown above.though. |
67 ski nat wrote:Posted By: KENO
Date Posted: May-29-2020 at 6:14pm
No problem, it was laying on a shelf,along with that gasket And JQ, I'm more like the 351W junkman
|
Posted By: 67 ski nat
Date Posted: May-30-2020 at 11:48am
|
I need reading glasses. I’m holding my phone 3’ from my face Sorry missed that. Just trying to help |