Raw Water Pump
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48772
Printed Date: November-27-2024 at 6:21am
Topic: Raw Water Pump
Posted By: 99airwarrior
Subject: Raw Water Pump
Date Posted: May-31-2020 at 11:11pm
| 1985 2001 raw water pump Sherwood G-21 mounted on the port side of engine Right Rotation 351W which way does the cam screw point up or down the pump is almost horizontal. My memory is not real good anymore. I did search for the answer and not being lazy and I found the P.C.M. engine which mounts the pump on the starboard side of the engine and vertical. which say's Right rotation engine's have the cam screw facing out. Thank You for the help Joe |
Replies:
Posted By: KENO
Date Posted: June-01-2020 at 9:37am
If you take the middle drawing in the picture below and rotate the drawing so your inlet and outlet face the correct way, it'll tell you where the screw should be. For example if the inlet is on the outboard side of the pump and the outlet is facing inboard, rotate the picture 90 degrees to the left and your screw would be facing down 
|
99airwarrior wrote:Posted By: 99airwarrior
Date Posted: June-01-2020 at 2:47pm
| Keno great illustration Thank You Joe |
Posted By: KENO
Date Posted: June-01-2020 at 2:58pm
It might have been Hollywood that made that. It's way beyond what I could do 
|