96 Sig. edition dash config.
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Common Questions
Forum Discription: Visit here first for common questions regarding your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48807
Printed Date: September-22-2024 at 2:47pm
Topic: 96 Sig. edition dash config.
Posted By: ultrarunner
Subject: 96 Sig. edition dash config.
Date Posted: June-05-2020 at 11:48am
|
Would someone mind shooting me a pic of your dash pod config, or a pic of how it originally delivered. I have this strange volt meter (in addition to the OEM unit), no hobbs meter, and the mounting plate where the check engine light is just black, with no markings. I seem to recall that plate was labeled in other models. Thanks, Mark |
Replies:
Posted By: gun-driver
Date Posted: June-05-2020 at 12:04pm
|
Posted By: ultrarunner
Date Posted: June-05-2020 at 12:07pm
|
Ah ha! perfect. Thanks much Paul. As I suspected, the hobbs was swapped out in favor of this strange voltage condition meter. And my plaque is not OEM.... BTW, how are things in PIT? I have fond memories of skiing in Clarion on the Clarion River...fun times.... |
Posted By: gun-driver
Date Posted: June-05-2020 at 12:17pm
Things are good weathers been up and down.  Been super busy just going to get one of the boats out of storage in a couple hours. 
|
Posted By: ultrarunner
Date Posted: June-05-2020 at 12:19pm
| YAY! I think we're going to drop in at Bantam this weekend. It'll be first time out on the boat:-) |
Posted By: Hollywood
Date Posted: June-05-2020 at 1:21pm
| You should visit TRbenj. He lives on that lake. |