Cleaned up the console on Fish
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48810
Printed Date: November-15-2024 at 2:22am
Topic: Cleaned up the console on Fish
Posted By: jblocal
Subject: Cleaned up the console on Fish
Date Posted: June-07-2020 at 11:58am
|
Had some extra time with all crap going on lately to get my console and wiring cleaned up. Recored the console and flush mounted electronics. I got the wiring as neat as I had enough patience for. I have a DUI distributor that I want to swap out with the Mallory I have now. The DUI gets straight 12v no resistor correct? Will my current 8mm wires from skidim work with the DUI. https://ibb.co/Lx8T0F0" rel="nofollow - https://ibb.co/Lx8T0F0[/URL https://ibb.co/X5ymdYK" rel="nofollow - https://ibb.co/X5ymdYK Was trying post pics on here was having trouble |
Replies:
Posted By: Jonny Quest
Date Posted: June-07-2020 at 2:14pm
|
The Fish is looking great. Nice work. Yes, the DUI takes a full 12V (no resistor or ballast). My own preference is a 10 or 12 gauge wire. 10 gauge might be a bit of overkill, but "go big or go home". If your spark plug wires are designed for a High Energy Ignition (HEI) then they will likely fit, If not, you will need new wires to fit the HEI "male" terminal coming out of the distributor cap. I prefer to make my own spark plug wires so that I can get the lengths where I want them. Making wires is not difficult and there are several nice plug wire kits out there with everything you need. JQ ------------- Current 2003 Ski Nautique 206 Limited Previous 2001 Ski Nautique Open Bow 1994 Ski Nautique Open Bow Aqua skiing, ergo sum |
Posted By: 8122pbrainard
Date Posted: June-07-2020 at 3:19pm
|
Cole, Very nice work on the wiring job.  It sure doesn't look like anything that came out of the factory. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: jblocal
Date Posted: June-07-2020 at 3:21pm
| Thanks JQ! Going order kit and make some up. |
Posted By: gun-driver
Date Posted: June-08-2020 at 1:53am
When you copy the code from imgbb use the BB Full code then just paste the copied link direct into the narrative, no need to use the photo icons in the header. |
jblocal wrote: