Tower dimensions for 94
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Common Questions
Forum Discription: Visit here first for common questions regarding your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48833
Printed Date: April-15-2025 at 3:01am
Topic: Tower dimensions for 94
Posted By: Dreaming
Subject: Tower dimensions for 94
Date Posted: June-10-2020 at 3:11pm
|
Hey Guys, I found a tower locally that was once mounted on an 87 Ski Nautique 2001. IIRC, the beam width of the 2001 models is going to be too small for the tower to fit my '94 properly, but it's worth asking the question here. Does anyone with a slant back boat have tower mounting dimensions for a New dimension or Samson tower? Will this work? Here's what the owner posted about the tower: 65" between front mounts 77" between back mounts 65" between front and back mounts |
Replies:
Posted By: gun-driver
Date Posted: June-10-2020 at 3:36pm
| I would measure your boat and ask if the measurements given are center to center, insides or out sides that should give you an idea at least. |
Posted By: flyweed
Date Posted: June-10-2020 at 4:13pm
|
agree with Gun Driver....you won't know for sure until you take actual measurements. Measure your boat, and then ask for measurements from center mount bolt/hole to center mount bolt/hole, both sie to side and front to back. I did the same thing. I have a 1993 SN, and got an aftermarket Boomtower off a 1999 sport Naautique from Indiana, just confirmed measurements and it fit nicely. Also I can tell you that the BEAM for a 1993 SN is 91 inches. ------------- '93 Ski Nautique NWZ, Air Boom Tower Drink Tonight..for tomorrow We Ride! |
Posted By: 8122pbrainard
Date Posted: June-10-2020 at 4:14pm
|
Kris, http://www.correctcraftfan.com/reference/bview.asp?id=53#" rel="nofollow - Per the 87 2001 brochure in the reference section, it says the beam is 84" ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: Dreaming
Date Posted: June-10-2020 at 5:57pm
Measurements in the garage look to be very similar for flat mounting on the top of the bow but it's hard to know exactly where I would be placing it on the boat. Width on the back legs seems that it might be a bit short (like 3 inches or so) which puts the legs on the inside of the deck's rails. I am assuming I would want it centered in on the deck rails.   |