Quick Question - Prop Nut Size
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48942
Printed Date: March-05-2025 at 1:04pm
Topic: Quick Question - Prop Nut Size
Posted By: Nauti Gator
Subject: Quick Question - Prop Nut Size
Date Posted: June-25-2020 at 2:34am
|
Can someone tell me what size socket I need to remove the prop nut on a '93 SNOB? Thank you |
Replies:
Posted By: Nautiquehunter
Date Posted: June-25-2020 at 10:02am
| I think its a 1 1/8 or a 1 1/4 |
Posted By: MurphyCO
Date Posted: July-01-2020 at 4:30pm
|
1-1/4" is the size; just replaced one last weekend. Gary |
Posted By: 8122pbrainard
Date Posted: July-01-2020 at 5:02pm
Not necessarily. Depends on whether you are using a "nylock" or .castellated nut. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
MurphyCO wrote:Posted By: MurphyCO
Date Posted: July-01-2020 at 5:09pm
|
Posted By: MurphyCO
Date Posted: July-01-2020 at 5:10pm
|
Clarification. On my 1999 with a castle nut the socket size was 1-1/4". |