pressure sensor tap
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48987
Printed Date: January-16-2025 at 11:19am
Topic: pressure sensor tap
Posted By: dynasim
Subject: pressure sensor tap
Date Posted: July-01-2020 at 11:53pm
|
Is the plugged hole that v's away from the pressure sensor a second place to take the oil pressure? I want to install a pressure gauge. Thanks for all the help, and the tolerance of stupid questions! Chris 
|
Replies:
Posted By: Nautiquehunter
Date Posted: July-02-2020 at 8:36am
| It looks that way to me |
Posted By: 8122pbrainard
Date Posted: July-02-2020 at 8:47am
|
Chris, It doesn't look like you would be able to swing/turn even a 1&1/2" diameter gauge directly in that tight area so, you would need to do the same as they did with the pressure sender. See that they used an additional nipple and coupling to move the sender away from the housing. The alternate is a union or I'd put a "T" where the coupling is below the sender. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |