Print Page | Close Window

84 SN 454 Rebuild

Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=49071
Printed Date: March-05-2025 at 1:13pm


Topic: 84 SN 454 Rebuild
Posted By: Justin311
Subject: 84 SN 454 Rebuild
Date Posted: August-12-2020 at 10:28am
I just wanted to ask you guys real quick for tips or suggestions on this motor we are dropping in soon........it's a 84 SN Barefoot.  It was restored by a guy that traveled a lot and left it one winter....cracked the block.  Well we pulled it out and have been in the process of transferring pretty much all the accessories to a new long block.  So far I have had to buy several things from the guys at SKIDIM.  New manifolds, new circ pump, new impeller, new oil pressure sensor, new fuel pump.....and so on.  ANYTHING YOU GUYS CAN GIVE ME A HEADS UP ON THAT MAKES LIFE EASIER OR PEACE OF MIND?  Thanks.


Replies:
Posted By: 8122pbrainard
Date Posted: August-12-2020 at 12:26pm
Justin,
What engine rotation are you going with on the new block swap? 


-------------
/diaries/details.asp?ID=1622" rel="nofollow -

54 Atom

/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique

64 X55 Dunphy

Keep it original, Pete
<

Posted By: Justin311
Date Posted: August-12-2020 at 12:31pm
It's a reverse rotation motor.  The long block is a Power Torque reverse rotation.  I double checked to make sure all of that was correct.  I'm pretty sure the block that was in it was the original PCM.....but it had been gone thru.  

Posted By: 67 ski nat
Date Posted: August-12-2020 at 12:59pm
454 awesome.


Print Page | Close Window