Print Page | Close Window

Oil pressure switch replacement

Printed From: CorrectCraftFan.com
Category: CorrectCraftFan.com
Forum Name: Help CorrectCraftFan.com
Forum Discription: Learn how you can contribute to CorrectCraftFan.com
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=49075
Printed Date: May-21-2024 at 10:15am


Topic: Oil pressure switch replacement
Posted By: hankloutz
Subject: Oil pressure switch replacement
Date Posted: August-12-2020 at 4:35pm
I recently purchased a 99 SNOB. I noticed a small amount of oil in the bilge. I found the oil pressure switch dripping a small amount of oil from the top. It appears that my switch is a R020015. It seemed to me that particular part is no longer available and has been replaced with the R020015A. Has anyone made this replacement? If so, any advice? I have the R020015A sitting on my toolbox from Nautique. Is it as simple as swapping the old switch for the new?



Replies:
Posted By: AAM196
Date Posted: October-06-2020 at 11:45am
I did... use the R020015A... yes straight forward 5 min swap.  mine wasn't dripping... just failed and put boat into limp mode.  

I see the metal is different... maybe what led to drip?  



Print Page | Close Window