Print Page | Close Window

PCV hose for vacuum check? Printed From: CorrectCraftFan.com Category: General Correct Craft Discussion Forum Name: General Discussion Forum Discription: Anything Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=49150 Printed Date: March-04-2025 at 9:06pm Topic: PCV hose for vacuum check? Posted By: DockDoc Subject: PCV hose for vacuum check? Date Posted: August-29-2020 at 9:47am Want to check that my idle mixture is dialed in correctly. Is it reasonable to use the PCV hose (disconnected from PCV) to hook up the gauge for this purpose? No other existing ports that I can find. Guess I could pull the plug on the back of the manifold and put in a brass fitting but given the PCV hose is so accessible figured that may be adequate. ------------- 1993 Sport Nautique PCM 351w, no ProTec

Print Page | Close Window