'88 Helm Trim Ring
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=49267
Printed Date: November-22-2024 at 5:08am
Topic: '88 Helm Trim Ring
Posted By: NCH20SKIER
Subject: '88 Helm Trim Ring
Date Posted: September-22-2020 at 10:15am
|
I am in need of the trim ring circled below email pic's to inboardfan@gmail.com Thank you  ------------- '05 206 Limited '88 BFN |
Replies:
Posted By: TRBenj
Date Posted: September-22-2020 at 10:21am
|
There are 2 different trim rings- and they each use their own cap style. They look the same at a glance but are not interchangeable. To keep your existing plastic cap, you need another plastic ring. If you get a metal ring, then you’d need the foam/rubber cap style. The cap decals are available if you need them. |
Posted By: NCH20SKIER
Date Posted: September-22-2020 at 10:26am
|
Good information - Thank you Tim ------------- '05 206 Limited '88 BFN |
Posted By: illiniball2000
Date Posted: September-23-2020 at 9:16am
|
Tim where could I find the decal? ------------- Beer is my friend 87 Dominique Had 67 Starflite |
Posted By: GHTILL
Date Posted: September-23-2020 at 11:43am
|
I found one from Nautique Parts. Looks great ------------- TWSS |
Posted By: GHTILL
Date Posted: September-24-2020 at 12:55pm
------------- TWSS |
Posted By: GHTILL
Date Posted: September-24-2020 at 12:56pm
Ye I broke down and replaced my steering wheel. The "original" leather was too stiff and slick.  ------------- TWSS |
Posted By: Gary S
Date Posted: September-24-2020 at 1:38pm
Greg is that 7 hole trim ring plastic or aluminum ? If it's plastic I wonder if a 3D printer could make one. Just need a 3D scanner and a printer. 2K later and you'd be all set  . Our library has a printer wonder if any are getting scanners yet ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: NCH20SKIER
Date Posted: September-25-2020 at 4:48pm
Heck if that was the case why not just print out a new boat like they did at the University of Maine ------------- '05 206 Limited '88 BFN |
Gary S wrote:Posted By: Gary S
Date Posted: September-25-2020 at 7:23pm
Hmmm- no ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: GHTILL
Date Posted: September-27-2020 at 8:51am
|
Pretty sure the question was where he could find a new decal? Thought I could help in some small way...Guess I was wrong
------------- TWSS |
Posted By: KENO
Date Posted: September-27-2020 at 9:00am
|
Looks to me like you helped, complete with a place to buy it
|
Posted By: NCH20SKIER
Date Posted: October-05-2020 at 9:22am
|
Part sourced and installed with help from the this site - thanks Tim. This trim ring is aluminum which is a nice upgrade from the plastic version.  ------------- '05 206 Limited '88 BFN |
Posted By: GHTILL
Date Posted: October-05-2020 at 11:16am
|
Looks factory!! ------------- TWSS |