Print Page | Close Window

prop shaft angles?

Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=49381
Printed Date: March-04-2025 at 1:58pm


Topic: prop shaft angles?
Posted By: MourningWood
Subject: prop shaft angles?
Date Posted: October-31-2020 at 4:14pm
Anyone know the as-built prop shaft angles for following models:
Ski Nautique 2001 (1982-1988)
Ski Nautique TSC1 (1997-)

Thanks


-------------
1964 Dunphy X-55 "One 'N Dun"

'I measured twice, cut three times, and it's still too short!"


Replies:
Posted By: Jonny Quest
Date Posted: October-31-2020 at 7:58pm
Well the PCM 1.23:1 transmission output shaft has a down angle of 9 degrees. That may get you close.  

JQ


-------------
Current
2003 Ski Nautique 206 Limited

Previous
2001 Ski Nautique Open Bow
1994 Ski Nautique Open Bow

Aqua skiing, ergo sum

Posted By: MourningWood
Date Posted: November-02-2020 at 7:59pm
Thanks, helpful, but not quite what I need....
I'm asking if the TSC had a different shaft angle than the older 2001's...


-------------
1964 Dunphy X-55 "One 'N Dun"

'I measured twice, cut three times, and it's still too short!"


Print Page | Close Window