Fuel tank line replacement..
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Common Questions
Forum Discription: Visit here first for common questions regarding your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=49514
Printed Date: November-24-2024 at 2:57am
Topic: Fuel tank line replacement..
Posted By: ultrarunner
Subject: Fuel tank line replacement..
Date Posted: December-29-2020 at 5:48pm
| I'm ramping up on parts given the access I'll have with the shaft replacement. Is the line at the tank 3/16th's? Nothing in the PCM manual, as I suspect its just stock line the factory uses during assembly. Pics would be good too, as I misplaced the thread that just discussed this. Thanks, MS |
Replies:
Posted By: KENO
Date Posted: December-30-2020 at 6:36am
Since you seem to ask questions in this thread and others without mentioning things like what the boat/engine are, you should probably have an avatar and a signature line that says in every post what you have Unless for some reason you think everybody knows what you have or will do a search and figure out that it's a 96 SN with a gt40 engine.  I'd get some USCG approved 3/8 line though. A1-10 or A1-15 designation hose more than covers you requirement wise on the supply side of the LP fuel pump Here's a link to some of that stuff, with some info as you scroll down in the link. You can probably find better pricing with a little searching http://www.defender.com/product.jsp?id=4010345" rel="nofollow - link
|
ultrarunner wrote:Posted By: ultrarunner
Date Posted: December-30-2020 at 10:36am
|
Thank The Buddha we've got Ken policing our posts for accuracy of included info ;-) hehe... Thanks man!
|
Posted By: Riley
Date Posted: December-30-2020 at 11:09am
| I've found SKIDIm to have the best price on fuel line. Pick up some plastic hangers at NAPA or splurge and get the nice metal and rubber ones from McMaster Carr. |
Posted By: 8122pbrainard
Date Posted: December-30-2020 at 1:56pm
A good hardware store like Ace will also have them.  ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: KENO
Date Posted: December-30-2020 at 6:43pm
|
I'd bet that one of those big box stores like Home Depot has the same clamps too They might be cheap and inferior to the McMaster ones though.
They're everywhere
 |
Posted By: 8122pbrainard
Date Posted: December-30-2020 at 7:40pm
As of this last October, I've switched pitching to a different company. https://www.youtube.com/watch?v=sQVeONqunz4" rel="nofollow - Ace, the Helpful Hardware Folks - YouTube I'm now one of the "helpful hardware folks"  ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: Riley
Date Posted: December-30-2020 at 8:35pm
| What is amazing about McMaster Carr, other than they have everything that you need is I can order a bag of hose hangers at 5PM and they are delivered the next day by noon. How do they do that? |
Posted By: Gary S
Date Posted: December-30-2020 at 9:26pm
|
I drove over to the one here in Elmhurst about a week ago- I'm not telling Pete anything new but the place is huge. They are pouring more footings as well- looks to be adding on 1/3rd as much. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: ultrarunner
Date Posted: December-30-2020 at 10:43pm
|
You guys crack me up! So, I'm fairly well sourced for my project and may have found a buddy of mine that'll take on a couple of days work this winter in a nice toasty shop in the finger lakes :-) Easy haul up there from my hut. ARE Shaft will be here in a week and got a nice phone call today from SKIDim. Got plenty of 5200 and enough packing for the shaft and rudder. Cutlass bearing in-hand, and will have fuel line next week. Since we'll be in the shop, likely swap out the wheel hubs on the trailer so we're road-trip ready. I can overhaul the existing ones on the bench for spares. I'll wait till I'm summarized for a few of the small items...switch breakers, and the usual spring tune-up items. I'd planned on doing the drivers seat skins, so I'll look into the heated mats. Good option for those of us w/o heaters...yet ;-) I had an MB wagon years ago with a heated wheel...my wife LOVED it. Good call there.... Stay tuned...It's April before we know it! Mark 1996 SN Signature GT-40 |
Posted By: KENO
Date Posted: December-31-2020 at 5:16am
|
Hey.............nice signature line While you're doing that stuff, it would probably be good to pull out the anti siphon valve and the in tank suction line to check for junk. if you do, they'll probably be in good shape.............but if you don't, they'll turn around and bite you right at the least convenient time to have engine issues.
|
Posted By: KENO
Date Posted: December-31-2020 at 5:23am
A short 5 minute or so drive from home?
|
Posted By: ultrarunner
Date Posted: December-31-2020 at 8:12am
Funny you mention that, as I was thinking grabbing that valve as I was at Skidim. I know I have to fish out that gas cap chain screw that dropped down the filler neck this past fall :-( Ultra... 1996 SN Signature GT-40 |