Print Page | Close Window

Steel/Copper Oil Extraction Tube for PELA 2000 Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Boat Maintenance Forum Discription: Discuss maintenance of your Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=49788 Printed Date: January-30-2025 at 12:57pm Topic: Steel/Copper Oil Extraction Tube for PELA 2000 Posted By: dkimball Subject: Steel/Copper Oil Extraction Tube for PELA 2000 Date Posted: May-03-2021 at 5:29pm I am going to change my transmission oil on my 2003, 216 this weekend and was wondering where I can get a steel or copper tube to fit my pump.  It comes with the steel wire tube with the rubber/plastic coating but I have heard all of the stories about people getting that stuck in the transmission.  I believe the tube is 3/16" .  Has anyone used this extractor and tube combo without issue?  Maybe I am over thinking it I just don't want the tube to get stuck.  I assume Dextron III is what is being used these days as well?  It is the PCM 40A transmission.     ------------- Kimball Replies: Posted By: Gary S Date Posted: May-03-2021 at 6:46pm 2 choices- go to the hardware store and get a piece of copper tubing that fits snugly into the hose your using or go to an auto parts store and get a brake line that does the same. You don't need anymore than 18" or so. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport

Print Page | Close Window