Filling hull holes
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=50033
Printed Date: November-14-2024 at 12:56pm
Topic: Filling hull holes
Posted By: Netdewt
Subject: Filling hull holes
Date Posted: July-18-2021 at 9:39pm
I changed one of my speedos to a GPS unit, so I removed the pitot for it. It had been hacked on at some point. This doesn’t have to be super graceful. I filled the pitot holes with marine tex. Should I do the same for the tube? It’s much bigger so I’m not sure if it will fill.
For some reason there are no options in my post to add a picture.
-------------
1989 Ski Nautique 2001, 940 hours
|
Replies:
Posted By: Jonny Quest
Date Posted: July-18-2021 at 10:52pm
|
3M 5200 marine sealant.
JQ
-------------
Current
2003 Ski Nautique 206 Limited
Previous
2001 Ski Nautique Open Bow
1994 Ski Nautique Open Bow
Aqua skiing, ergo sum
|
Posted By: KENO
Date Posted: July-19-2021 at 6:16am
|
If you're filling the 3 screw holes with marine tex, why not use the marine tex to fill the hole where the tubing passes through the transom ?
It'll fill that hole
|
|