Print Page | Close Window

1992 Correct Craft Fan Bilge Blower Hose

Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=50049
Printed Date: January-16-2025 at 12:43am


Topic: 1992 Correct Craft Fan Bilge Blower Hose
Posted By: apolonie
Subject: 1992 Correct Craft Fan Bilge Blower Hose
Date Posted: July-22-2021 at 11:17am
Hi all,

Another newbie question, but does anybody know the size hose I would need (diameter) to replace the bilge blower hose? I had to run out of the state for the week and unable to measure it myself, just curious if anybody has it handy, thanks!

P.S. Does anybody know which manual covers the '92 PCM 351 5.8 Big Boss engine? I looked on the manuals section of this site and couldn't seem to find it.

Thanks!


Replies:
Posted By: pjsmoreno
Date Posted: July-26-2021 at 11:31am
My blower hose on my 89 is 3 inch

Posted By: desertskier
Date Posted: July-26-2021 at 11:43am
I don't see the manual either.  Must not have been recovered after the site hack.  Here is a link to the PN manual section.  The '93 PCM manual is what you need.

https://www.planetnautique.com/vb5/forum/nautique-topics/official-correct-craft-news/nautique/442813-owner-s-manuals-brochures" rel="nofollow - https://www.planetnautique.com/vb5/forum/nautique-topics/official-correct-craft-news/nautique/442813-owner-s-manuals-brochures


-------------
92 SN - Owned since 93
99 Pro Air
89 SN - Went to live on a lake in Texas
75 Donzi 16 - Sold in 93

Posted By: MrMcD
Date Posted: July-26-2021 at 1:45pm
My 95 also uses 3” so you should be good.

-------------

Posted By: apolonie
Date Posted: July-29-2021 at 10:21am
Thank you guys as usual for the answers. Always appreciate it!


Print Page | Close Window