Print Page | Close Window

Accelerator pump nozzles and cams

Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=50078
Printed Date: November-23-2024 at 2:24am


Topic: Accelerator pump nozzles and cams
Posted By: Mille1sj
Subject: Accelerator pump nozzles and cams
Date Posted: July-30-2021 at 3:46pm
After I rebuilt our 302 PCM for the ski Tique I have had an issue where it loses power. If I am cruising at about 8-10 mph and put the throttle down it will momentarily lose power then take off. Quick bog then takes off.

I changed the accelerator pump nozzle from the stock 21 to a 25. It appears to have fixed the issue. I also bought some different cams for the carb but haven’t tried any. Should I just leave it alone now or is there an additional benefit to going to a different accelerator cam?



Replies:
Posted By: Jonny Quest
Date Posted: July-30-2021 at 3:47pm
What color cam is on the carby now?

-------------
Current
2003 Ski Nautique 206 Limited

Previous
2001 Ski Nautique Open Bow
1994 Ski Nautique Open Bow

Aqua skiing, ergo sum


Posted By: Mille1sj
Date Posted: July-30-2021 at 4:26pm
Currently it has a red cam.


Posted By: KENO
Date Posted: July-30-2021 at 6:09pm
Since it appears to have fixed the issue, why mess with success? Wink


Posted By: Mille1sj
Date Posted: July-30-2021 at 6:13pm
I was thinking that as well but wasn’t sure if there was any performance or fine tuning reason to mess with the cam.


Posted By: KENO
Date Posted: July-30-2021 at 6:24pm
between cams and nozzles and different volume pump diaphragms, you could probably have enough combinations to drive yourself crazy, I think I'd just leave it alone unless you turned it into a real gas hog.

Besides it's RED and Jonny likes RED Wink


Posted By: Mille1sj
Date Posted: July-30-2021 at 6:31pm
Since the rebuild it already loves gas.



Print Page | Close Window