SN2001 transmission slipping 393 stroker
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=50171
Printed Date: July-07-2024 at 6:47am
Topic: SN2001 transmission slipping 393 stroker
Posted By: jtthirdeye
Subject: SN2001 transmission slipping 393 stroker
Date Posted: August-29-2021 at 10:29am
|
Last time I took her out I had to limp home at idle speed after an hour of fun due to the tranny slipping under load. I'm going to check the obvious but the question lingers in my head...if I have to rebuild who do I send the tranny off to that can rebuild it to handle the 393 stroker? or does someone sell a kit with high performance clutches to handle more than stock? Any help appreciated...   |
Replies:
Posted By: 8122pbrainard
Date Posted: August-29-2021 at 11:57am
|
Go with the bronze and steel clutch plates. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: KENO
Date Posted: August-29-2021 at 4:02pm
|
If you call the number below and talk to Joe he should be able to answer all your questions and rebuild it too if you want a shop to do it. He has some beefy clutch plates too He's even in the same state, maybe he's like right around the corner 
|
FFImarine wrote: