'94 Ski Nautique parts needed
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=50279
Printed Date: October-31-2024 at 9:30pm
Topic: '94 Ski Nautique parts needed
Posted By: MourningWood
Subject: '94 Ski Nautique parts needed
Date Posted: October-04-2021 at 6:02pm
|
Looking to buy: Large glove box lid with hinges (on top left of dash)...or just the hinges. Plastic seal strip along bottom of front base of windshield frame (hides the hold-down screws). Engine box prop rod (I think pre-gas strut) Thanks ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |
Replies:
Posted By: MourningWood
Date Posted: October-11-2021 at 11:39am
|
Anyone? ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |
Posted By: ScottZ
Date Posted: October-11-2021 at 11:14pm
|
I have the plastic engine cover, bow light. No strip for the windshield or glove box lid. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: MourningWood
Date Posted: October-12-2021 at 1:09am
Awesome. Thanks. please send pics to bcferrin15@gmail.com. Thank you. ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |
ScottZ wrote:Posted By: MourningWood
Date Posted: October-18-2021 at 11:35am
|
.....or not. Still looking..... Thx ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |
Posted By: ScottZ
Date Posted: October-18-2021 at 10:48pm
|
Pictures headed your way this week. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: ScottZ
Date Posted: December-09-2021 at 12:33pm
|
I have the plastic cover for the top of the engine. I can post a picture this evening. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: jimsport93
Date Posted: December-09-2021 at 3:00pm
|
Brian, I bought some plastic windshield seal strip from Nautique parts years ago. It was not flat like what you most likely have, but it did work for my 93 Sport. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=2798 - 93 Sport Nautique |
Posted By: ScottZ
Date Posted: December-10-2021 at 10:51pm
 
------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: MourningWood
Date Posted: December-14-2021 at 1:11am
|
Scott-sent you a PM jimsport91-thanks for the tip on the windshield seal. ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |
Posted By: NCH20SKIER
Date Posted: December-14-2021 at 4:03am
|
Used the same gasket seal material on my '88 BFN last season - seemed to work well albeit different profile from original ------------- '05 206 Limited '88 BFN |
Posted By: wetskier2000
Date Posted: December-14-2021 at 9:22am
|
ditto on the WS strip, the more plastic/rubber, rounded version fit our '97 very nicely in place of the deteriorating flat foam-ish original piece. It came from Nautique Parts. I vaguely recall seeing some glove box doors there also, ------------- Current: 1997 Nautique Previous: 1987 Nautique 1964 American Skier |
Posted By: MourningWood
Date Posted: February-01-2022 at 9:44pm
|
Updated initial post...still looking for a couple tidbits...thanks. ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |
Posted By: Jonny Quest
Date Posted: February-02-2022 at 12:27am
|
Wood I’ve got a box of stuff from my 1994 SNOB somewhere in my garage. I’ll send you a list of what I’ve got. JQ ------------- Current 2003 Ski Nautique 206 Limited Previous 2001 Ski Nautique Open Bow 1994 Ski Nautique Open Bow Aqua skiing, ergo sum |