new engine hose(s)
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=50330
Printed Date: January-15-2025 at 10:16pm
Topic: new engine hose(s)
Posted By: MourningWood
Subject: new engine hose(s)
Date Posted: October-26-2021 at 9:14pm
|
Bit of trouble locating the small (1" (?)) hoses running from t-stat housing to exhaust manifolds. I see PCM no longer provides, so next best? Thsnk ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |
Replies:
Posted By: Jonny Quest
Date Posted: October-26-2021 at 9:34pm
|
www.skidim.com and www.nautiqueparts.com sell it. https://skidim.com/1in-water-hose-wire-reinforced.html https://www.nautiqueparts.com/product/hose-1-water-hardwall-wire-reinforced-sold-by-the-foot/ This is the metal reinforced stuff. For T-Stat to exhaust risers, you really don't need metal reinforced. Many auto parts stores carry 1 inch "heater hose" or "soft wall" hose. JQ ------------- Current 2003 Ski Nautique 206 Limited Previous 2001 Ski Nautique Open Bow 1994 Ski Nautique Open Bow Aqua skiing, ergo sum |
Posted By: gun-driver
Date Posted: October-27-2021 at 9:23am
|
A little help https://skidim.com/1in-water-hose-wire-reinforced.html" rel="nofollow - https://skidim.com/1in-water-hose-wire-reinforced.html
|
Posted By: MourningWood
Date Posted: October-27-2021 at 10:57am
|
Thank you thank you... Damn! You guys are GOOD! ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |
Posted By: desertskier
Date Posted: October-27-2021 at 11:03am
|
I just ordered 12.5' from eBay. Enough to replace all my hoses. https://www.ebay.com/itm/121762890740" rel="nofollow - MPI Product 100-1004 Serie 100 Flex Premium Water Hose 1"x12.5' Hardwall Boat MD ------------- 92 SN - Owned since 93 99 Pro Air 89 SN - Went to live on a lake in Texas 75 Donzi 16 - Sold in 93 |
Posted By: swilliams
Date Posted: October-27-2021 at 12:02pm
|
I’ve used the Gates hose catalog to narrow down hoses. It has dimensions and pics as well. The molded hose catalog is available online. Finding parts for my Omc is always a challenge so my search is always ongoing. ------------- 1976 Martinique,350 Omc. 1975 Glastron/Carlson CV16,115 Merc. |
Posted By: desertskier
Date Posted: November-04-2021 at 3:29pm
Just an FYI for anyone looking to replace the engine water hoses. I received the hose today. Here's a picture of the box label. If you search for "MPI 100-1004" that is the precut 12.5' 1" hose from MPI. The MPI PN for the bulk hose is 100-1000. My '92 needs about 11.5 to 12.0 ft. ------------- 92 SN - Owned since 93 99 Pro Air 89 SN - Went to live on a lake in Texas 75 Donzi 16 - Sold in 93 |
Posted By: MourningWood
Date Posted: November-04-2021 at 4:02pm
It's OK. We're here for you.... ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |
desertskier wrote:Posted By: desertskier
Date Posted: November-04-2021 at 4:23pm
 ------------- 92 SN - Owned since 93 99 Pro Air 89 SN - Went to live on a lake in Texas 75 Donzi 16 - Sold in 93 |