Propeller Fish Nautique - Help!
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=50376
Printed Date: November-23-2024 at 8:29pm
Topic: Propeller Fish Nautique - Help!
Posted By: jmesser
Subject: Propeller Fish Nautique - Help!
Date Posted: November-24-2021 at 10:51am
|
I have a 1986 Fish Nautique and I need a prop. I prefer to put exactly what came stock back on it. Unfortunately, I don't know what that was. Drivetrain is 351 Left Hand/standard rotation with a PCM40 1:1 trans. If any Fish Nautique owners could tell me what they have on theirs it would be much appreciated.! If anyone has one for sale, please advise! Thanks guys! ------------- Johnnie Messer |
Replies:
Posted By: KENO
Date Posted: November-24-2021 at 12:25pm
|
I don't have a FN, but if you click on the link there will be some reading for you.  It'll say that a 14X11 prop for a 1 1/8 inch shaft was original in at least a few of the threads. If anybody gives you prop numbers, I'd double check their numbers since you have a normal rotation setup. |
Posted By: jmesser
Date Posted: November-24-2021 at 10:04pm
|
As always, your such a great Ambassador to the Correct Craft name. I will be reading it all as I am riding... Current situation- south of Tampa en route Key West. The sheer quantity of boats on these small roads is amazing. Seems the panhandle, where I live, has just gotten rid of small mom and pop boat sales and repair... I miss seeing them. ------------- Johnnie Messer |
Posted By: Mountain Man
Date Posted: December-03-2021 at 11:23am
|
My 86/87' FN came with an extra propeller that the PO had labeled as original that is stamped 14 x 10 "L" cup - 1 1/8" shaft. Can't speak to its performance as the boat had already been refit with GT-40 power and PCM40A drive. Good Luck, Steve |
Posted By: jmesser
Date Posted: December-03-2021 at 5:48pm
|
Thank you Steve! Very much appreciate that! ------------- Johnnie Messer |
Posted By: turboapache
Date Posted: January-04-2022 at 1:59pm
|
If you dont have one yet, I have a like new one from my fish nautique. It is the right hand version. I will take 200.00 for it. ------------- there is no substitution for cubic inches. |
Posted By: jmesser
Date Posted: January-09-2022 at 7:47pm
|
Apologies, I just sent a PM too. I'm way behind... Yes sir, I still need one. What are the specs on your prop? Johnnie ------------- Johnnie Messer |
Posted By: KENO
Date Posted: January-10-2022 at 7:37am
It looks like Turboapache has a RH prop and that's not what you want
|
turboapache wrote:Posted By: wetskier2000
Date Posted: January-11-2022 at 8:44am
|
...so close and so cheap... but prolly not quite what you need... at 20 bucks would make a great wall hanger.. https://www.facebook.com/marketplace/item/282883133730294/ ------------- Current: 1997 Nautique Previous: 1987 Nautique 1964 American Skier |