engine wires ('94 PCM Pro Boss)
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=50431
Printed Date: November-22-2024 at 11:37pm
Topic: engine wires ('94 PCM Pro Boss)
Posted By: MourningWood
Subject: engine wires ('94 PCM Pro Boss)
Date Posted: January-10-2022 at 3:23pm
Have these 3 wires on engine harness, but no corresponding connectors on boat's harness...Getting ready to re-install powertrain
------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |
Replies:
Posted By: KENO
Date Posted: January-10-2022 at 4:36pm
|
Where do the other end of those 3 wires go to on the engine? Is this a ProTec that always had what looks like a carburetor in your picture, or did it once have fuel injection? Were they just hanging there when you took the engine out? So many questions
 |
Posted By: KENO
Date Posted: January-10-2022 at 4:58pm
|
Here's a link to a manual with a wiring diagram of the engine side of things Figure 69 page 51. If only they gave wire colors on the diagram http://manualzz.com/doc/17588041/1993-pcm-manual" rel="nofollow - link
|
Posted By: Jonny Quest
Date Posted: January-10-2022 at 5:28pm
|
Dang. I don’t recognize those wires and connectors. Maybe for the TBI unit? It’s been a while and my 61 Y/O memory is starting to leak… JQ
------------- Current 2003 Ski Nautique 206 Limited Previous 2001 Ski Nautique Open Bow 1994 Ski Nautique Open Bow Aqua skiing, ergo sum |
Posted By: MourningWood
Date Posted: January-10-2022 at 6:40pm
|
Well, thank you both. I was so excited to finally be able to post pics, that I forgot to log into my memory. This may have once been injected, I got it (and still is) carbureted. And, I found a photo taken at purchase...aha!   ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |
Posted By: Gary S
Date Posted: January-10-2022 at 7:08pm
|
Light green one on a gt40 is for the slow system warning light. Does the pro tec have the same ? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: KENO
Date Posted: January-11-2022 at 7:40am
So I guess your photo answered all of your questions?
|
MourningWood wrote:Posted By: MourningWood
Date Posted: January-11-2022 at 10:43am
|
Yes, thanks, I think so. Much todo about nuthin'. (probably a late-sixties thing) ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |