Bleeding Air in Coolant System PCM 409 (non Cat)
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=50439
Printed Date: January-15-2025 at 10:12pm
Topic: Bleeding Air in Coolant System PCM 409 (non Cat)
Posted By: SGregg
Subject: Bleeding Air in Coolant System PCM 409 (non Cat)
Date Posted: January-15-2022 at 8:34pm
|
Hoping to get some info on how to bleed air out of the closed cooling system on a non-CAT PCM 409. Everything was fine until I plumbed in a heater, engine is now over-temping |
Replies:
Posted By: KENO
Date Posted: January-16-2022 at 8:55am
|
Here's a link to a 2012 manual that might cover your engine. It sounds like maybe you repowered with a 409 of some unknown year so it may or may not be what you need. Start at page 35  |
Posted By: SGregg
Date Posted: January-16-2022 at 9:59am
|
Thank you! Yes, repowered with a 2021 from PCM but this 2012 manual is super helpful 👍 |