'94 Inverta-flow mounts
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=50476
Printed Date: January-15-2025 at 10:04pm
Topic: '94 Inverta-flow mounts
Posted By: MourningWood
Subject: '94 Inverta-flow mounts
Date Posted: February-11-2022 at 7:02pm
|
Looking for a close-up of the orientation of the twisted stainless muffler supports. I kept them L & R, but forget how they went? Thanks for any help. ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |
Replies:
Posted By: desertskier
Date Posted: February-14-2022 at 9:16am
|
I don't have any pics but I believe the tab faces outboard and they have rubber insulators between the muffler and the mount. My muffler had marks/indentations so you can probably tell if they are on backwards. ------------- 92 SN - Owned since 93 99 Pro Air 89 SN - Went to live on a lake in Texas 75 Donzi 16 - Sold in 93 |
Posted By: MourningWood
Date Posted: February-14-2022 at 11:42pm
|
Thank you desert skier. I'll look for the marks. If anyone has/can take a pic that would also be a huge help. Thx ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |
Posted By: MidCentury
Date Posted: February-16-2022 at 3:11pm
------------- 94 SN |
Posted By: MourningWood
Date Posted: February-18-2022 at 12:31am
|
BOOM! Thank you very much. That gets me going the right way. ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |