'94 SN speaker removal
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=50488
Printed Date: March-03-2025 at 4:48pm
Topic: '94 SN speaker removal
Posted By: MourningWood
Subject: '94 SN speaker removal
Date Posted: February-23-2022 at 7:02pm
|
Anyone tell me best way to remove/replace speakers on a '94 (or there about)? Looks to me as though the entire side panels need to come out...oh I hope not. Thanks. ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |
Replies:
Posted By: flyweed
Date Posted: February-23-2022 at 7:26pm
|
my 93 I did not have to remove combing pads..I simply removed the speaker grill, then there was 4 screws holding them onto the combing pads. removed the 4 screws and speakers pulled out. now I have seen some screws are on the face/front and others were on the back side of the speaker/combing pads. You'll just have to look and see where your screws are located. ------------- '93 Ski Nautique NWZ, Air Boom Tower Drink Tonight..for tomorrow We Ride! |
Posted By: MourningWood
Date Posted: February-24-2022 at 11:52am
|
Thanks. It appears that the original speakers (at least in '94) have no removable grille. They are either installed from the backside, or installed frontside before upholstery. I can't tell....still hoping someone has done this... ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |
Posted By: TRBenj
Date Posted: February-24-2022 at 12:51pm
| Believe they’re rear mount… the TSC’s (97+) certainly were. |
Posted By: MourningWood
Date Posted: February-25-2022 at 1:49pm
There's the little buggers...you are right. Thanks for the help. ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |
TRBenj wrote: