Engine Exhaust Riser Bolts
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=50515
Printed Date: November-22-2024 at 11:12pm
Topic: Engine Exhaust Riser Bolts
Posted By: Otto Throttle
Subject: Engine Exhaust Riser Bolts
Date Posted: March-21-2022 at 11:00am
|
I am replacing the fiberglass tubes and all hoses north of the muffler on my 1999 SN. I plan on lose fitting it all then securing it all working south. My question is there a bolt torque spec for the exhaust risers? Any other tips you have would be appreciated too! As always...Thanks Otto ------------- Otto |
Replies:
Posted By: KENO
Date Posted: March-21-2022 at 12:23pm
Why yes there is  12-18 ft lbs is a good number See the link below to see where that number came from http://www.correctcraftfan.com/forum/forum_posts.asp?TID=42868&title=torque-specs" rel="nofollow - link It's a generic number for a 5/16-18 carbon steel grade 5 bolt
|
Otto Throttle wrote:Posted By: Otto Throttle
Date Posted: March-22-2022 at 8:05pm
|
Thank you !!!!! ------------- Otto |