1980's PCM engine paint
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=50571
Printed Date: March-03-2025 at 4:52pm
Topic: 1980's PCM engine paint
Posted By: cw05
Subject: 1980's PCM engine paint
Date Posted: April-21-2022 at 7:45pm
| Does anyone know of a seller of the light green PCM engine paint from the 1980's? I have to pull my motor and would like to refresh the paint while it's out. I know that I can pull a valve cover and have it matched. I was just hoping someone made have already formulated the correct original color. Thanks- |
Replies:
Posted By: MourningWood
Date Posted: April-21-2022 at 9:05pm
|
It isn't/wasn't silver? ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |
Posted By: KENO
Date Posted: April-22-2022 at 6:26am
|
Or could you mean an early 70's Waukesha/PCM engine like the one in the picture, since like Mourning Wood mentioned the 80's engines were silver? Those early 70's engines weren't all green, just the exhaust manifolds and valve covers and the rest was a dull blue  There was also a darker green in the mid 70's on the exhaust manifolds only, the picture below is a dull blue 76 PCM engine  Then in the late 70's and through the 80's, a silver engine with black exhaust manifolds. This is assuming we're talking PCM Ford engines
|
Posted By: pjsmoreno
Date Posted: April-22-2022 at 10:11am
| My 89 BBC is also a silver block with black exhaust manifolds and risers |
Posted By: Hollywood
Date Posted: April-22-2022 at 12:03pm
| My 88 SBF is also a silver block with black exhaust manifolds and risers |