Print Page | Close Window

Display & controls not on. Engine starts

Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=50642
Printed Date: September-28-2024 at 7:31pm


Topic: Display & controls not on. Engine starts
Posted By: tlwolf
Subject: Display & controls not on. Engine starts
Date Posted: May-24-2022 at 11:07am
 SN 200 OB 2011. I can start the engine but the display is not booting up and other control buttons not working. I have tried entering the master code to no effect. Any suggestions?


-------------
Bay Rat


Replies:
Posted By: tlwolf
Date Posted: May-25-2022 at 12:55pm

I got it working.

I had read a post that it might take 30 minutes to wake up. I did not think much of the suggestion but decided to try it. Turned system on. Came back a hour later and the screen was alive. The computer must have taken a while to sort itself out.

Now I just have the blower not coming on. Suspect the switch so I’ll have to figure out how to get to it.



-------------
Bay Rat


Print Page | Close Window