'78 pcm 351 front view pic anyone?
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=50705
Printed Date: November-27-2024 at 12:26pm
Topic: '78 pcm 351 front view pic anyone?
Posted By: NeilMcG
Subject: '78 pcm 351 front view pic anyone?
Date Posted: June-23-2022 at 2:47pm
|
I'm putting the ole 78 back together and as Murphy's would have it, I'm unable to find the one picture i need to put the hoses and rwp back on correctly. If you have a front looking picture or even a diagram of the water path, it'd be a big help. Thank you! |
Replies:
Posted By: KENO
Date Posted: June-23-2022 at 5:44pm
Here are a couple of pictures    For your Reverse Rotation engine the screw head on the pump a little below the red arrow should be facing outboard like in the second picture |
Posted By: NeilMcG
Date Posted: June-23-2022 at 7:07pm
|
Thank you! |
Posted By: NeilMcG
Date Posted: July-01-2022 at 5:13pm
|
What size hose is needed for the lower t-stat housing to the RWP? |
Posted By: KENO
Date Posted: July-01-2022 at 6:13pm
|
I think you mean from the lower t stat housing to the circulating pump It's 1 3/4 inch ID and a foot will take care of you. A short piece about 2 1/2 inches or so between the circulating pump and the j tube and a longer piece from the j tube to the lower housing. The longer piece is around 6 inches long
|
Posted By: NeilMcG
Date Posted: July-01-2022 at 6:22pm
|
Oh yeah...that's indeed what I meant. Thank you!! |