Guys, had to go parts searching this weekend so I thought I would share some part numbers for anyone that was still messing with a Ford with a Prestolite dizzy. 

All pieces were sourced at a local Napa = Napa part numbers. 

Points Set - CS720A (Heavy duty version)

Condenser - AL869

Ignition Coil - IC10 (Fits the stock bracket and is specific to an external resistor setup)

Ballast Resistor - ICR37 (This bolts to the bracket in the stock location and has studs so you don’t need to cut off the factory ring style wire terminals. It ohm tested at 1.6 and produced about 9.7v at the coil running).

Time will tell if the parts are good quality but it’s running great a couple days in.