Federal propeller
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Common Questions
Forum Discription: Visit here first for common questions regarding your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=50734
Printed Date: November-21-2024 at 1:53pm
Topic: Federal propeller
Posted By: Scootermoo
Subject: Federal propeller
Date Posted: July-05-2022 at 9:20pm
|
Im new to CCF and this is my first post. My 76’ Southwind has a federal 975 stamped 13RH1 on it. I would like to get it repaired or purchase a replacement. Can someone please refer the models of Acme propellers that would be a good match? The federal is useable with light vibrations because of the scalloped leading edges in the 3 blades so I’m thinking it would be a spare. |
Replies:
Posted By: Hollywood
Date Posted: July-06-2022 at 12:14am
|
Definitely not 1” of pitch lol. Probably a missing 3 out there somewhere… I’d go with an Acme 540, a very common prop maybe you can even try before you buy. Most importantly, spend $0 repairing that Federal. |
Posted By: pjsmoreno
Date Posted: July-12-2022 at 12:18pm
|
I’m not a fan of Federal props either but it did save my
vacation at the lake earlier this summer when I bent my band new Acme 15 minutes
after I drop the boat in the water. |
Posted By: Scootermoo
Date Posted: July-12-2022 at 2:14pm
|
I went with the Federal as my spare and got a Acme 540. Thanks for your reply and the advise from CCF. |
Posted By: gun-driver
Date Posted: July-12-2022 at 8:43pm
Let us know how you like it so others will know.👍
|
Scootermoo wrote:Posted By: austinfullmer99
Date Posted: July-15-2022 at 6:39am
|
I’d like to know everyone’s opinion on upgrading from current 3 blade OJ Legend 1027 to a 4 blade OJ ------------- 1987 SN 2001 |
Posted By: KENO
Date Posted: July-15-2022 at 7:58am
See your other post about the same thing
 |