‘04 SN 206 Eng Temp Gauge
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=50761
Printed Date: January-15-2025 at 2:37pm
Topic: ‘04 SN 206 Eng Temp Gauge
Posted By: Arctic Blonde
Subject: ‘04 SN 206 Eng Temp Gauge
Date Posted: July-12-2022 at 2:03pm
|
Hey y’all! Engine Temp gauge not working. Looking for any troubleshooting help! Thanks and blessings! Dave |
Replies:
Posted By: Jonny Quest
Date Posted: July-12-2022 at 5:44pm
|
Things to troubleshoot: Bad temp sender. Loose wire(s) at either or both ends. Bad or broken wire(s) Bad gauge. Start with the wires as that has the highest probability of success — particularly if the gauge simply stopped working. JQ ------------- Current 2003 Ski Nautique 206 Limited Previous 2001 Ski Nautique Open Bow 1994 Ski Nautique Open Bow Aqua skiing, ergo sum |
Posted By: Arctic Blonde
Date Posted: July-12-2022 at 6:32pm
| Thanks JQ! Guessing the sending unit is good because I’m able to read temp on the digital gauge (tach/speedo). I’ll check the harness plug next, then wiring to the analog gauge. Last will be the gauge itself. |
Posted By: KENO
Date Posted: July-12-2022 at 8:35pm
|
Do you have Faria gauges in the boat?
Why would I ask that question?
 |