1982 vent window
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=5077
Printed Date: November-27-2024 at 7:40am
Topic: 1982 vent window
Posted By: dans
Subject: 1982 vent window
Date Posted: October-27-2006 at 4:17pm
I have a 1982 vent window drivers side with the metal part that goes down the gla$$ & makes it open.The handle is with it but the little knob on the inside has a crack,the handle is good.the little knob could be glued easy.The gla$$ can be used on pa$$enger side also & I have pa$$ side metal part the goes into the frame to open.I put in regular gla$$ that doesnt open.I know these are pricey so make offer plus $15.00 ship.Danstephens69@hotmail.com ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1404&sort=&pagenum=1&yrstart=1981&yrend=198582 - 82 2001 |
Replies:
Posted By: Cape Cod CC
Date Posted: October-28-2006 at 10:17pm
|
Hi Dan,
I think this will fit. I'll make you a fair offer right off the bat so how about $25 plus $15 for shipping. Let me know and I can PayPal or mail you a bank check. Thanks, Vince ------------- Cape Cod http://www.correctcraftfan.com/diaries/details.asp?ID=1175&sort=&pagenum=1&yrstart=1980&yrend=1980 - 1980 SN |
Posted By: dans
Date Posted: October-29-2006 at 12:25am
Send $40 to my pay pal please.Danstephens69@hotmail.com send address & I will ship Monday from dallas ups .No refund if it does not fit.You can re sale here if it doesn't. I also have an extra knob that goes on outside of window that I found from other side . The 2nd knob also has a hair line crack in it but goes together fine. You can position the knob on & glue & you wont see it. also will send extra frame handle mount from other window , but the extra one is missing the handle. So 1 window, 2 frame metal pieces that hold window (so you can use on both sides of boat if needed), 2 knobs on oposite side of handle that have small cracks in them ,extra handle frame bracket & 4 screws.Dealer wants around $200.00 in Dallas Thanks Dan ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1404&sort=&pagenum=1&yrstart=1981&yrend=198582 - 82 2001 |
Posted By: Cape Cod CC
Date Posted: October-29-2006 at 10:51am
|
Thanks for the reply. I will paypal you tonight. I did not see the picture you mentioned in the post. Perhaps it did not load. At any rate your description says it is in good shape so I will go with that.
Thanks for your time and you will see the Paypal this evening. Vince ------------- Cape Cod http://www.correctcraftfan.com/diaries/details.asp?ID=1175&sort=&pagenum=1&yrstart=1980&yrend=1980 - 1980 SN |
Posted By: Cape Cod CC
Date Posted: October-29-2006 at 10:55am
|
Hello,
Me again. I can not see the picture and I sent money. thanks Vince ------------- Cape Cod http://www.correctcraftfan.com/diaries/details.asp?ID=1175&sort=&pagenum=1&yrstart=1980&yrend=1980 - 1980 SN |
Posted By: dans
Date Posted: October-29-2006 at 12:23pm
Vince , I am looking at both pics right now on both posts.Are you logged in?Here it is again,I can see it from my computer.Thanks ,Dan ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1404&sort=&pagenum=1&yrstart=1981&yrend=198582 - 82 2001 |
Posted By: dans
Date Posted: October-29-2006 at 12:33pm
|
Sold!!!!!!!!!!!!! ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1404&sort=&pagenum=1&yrstart=1981&yrend=198582 - 82 2001 |
Posted By: cbcecil
Date Posted: September-05-2016 at 12:20am
|
Dan, I know your post is a bit old. But do you know where I can order those components that you listed years ago? Casey ------------- cbcecil |
Posted By: Donald80SN
Date Posted: September-06-2016 at 8:17pm
|
These parts are not available from Taylor anymore to my knowledge. Basically, you have to find someone parting out a boat. Those hinges are hard to find. It is likely that glass will only fit some years, but those hinges slide off and you can have some marine tempered glass made to fit with the holes drilled at the glass shop with the light green tint. Then you slide the hinge onto the new glass. I looked for years to get the right fit on my old 1980. It also helps to find the hinges with rubber on the outside to help with the fit and to keep rattles down. I have been down this road before. There is a post in the for sale section where someone is selling a complete 1980 windshield. you maybe able to get some hinges from him. The plastic pull locks are still available from Taylor and can be found on e-bay. The Square Handle like knobs are also hard to find. They are not pictured in this thread. Donald ------------- 1980 Ski Nautique SOLD Back to Cypress Gardens 2002 Sport Nautique, GT-40, FCT2, Cover Sports, Tower Bimini, Inc., Wet Sounds Audio System, Star Gazer Wake Edition S. 1968 Ski Nautique, Project. |