Replacing Speedo with Radio
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=50869
Printed Date: March-03-2025 at 5:32am
Topic: Replacing Speedo with Radio
Posted By: W.U.S.S.
Subject: Replacing Speedo with Radio
Date Posted: August-28-2022 at 4:51pm
|
I know I’ve seen this before, but I can seem to find it…. Who here has replaced one of their speedos with a round receiver..pics please. I have a 93 sncb, just wondering how it looked, and performed. TIA |
Replies:
Posted By: WakeskateNW
Date Posted: August-28-2022 at 11:05pm
It might have been mine. It fit perfectly. Never had any issues. Not powerful enough by itself to clearly hear music in the boat while towing a rider though. The speedo it replaced had a cracked lens so it was an easy choice.
|
Posted By: W.U.S.S.
Date Posted: August-30-2022 at 7:37pm
| What did you have to do the airlines on the back of the Speedo when you removed it |
Posted By: Jonny Quest
Date Posted: August-30-2022 at 9:21pm
|
The water lines from the pitot can be folded over a couple of times and pinched off with a strong zip-tie or 2. That should be enough to keep the water out. JQ ------------- Current 2003 Ski Nautique 206 Limited Previous 2001 Ski Nautique Open Bow 1994 Ski Nautique Open Bow Aqua skiing, ergo sum |
Posted By: gun-driver
Date Posted: August-30-2022 at 9:23pm
| You can either plug it or disconnect it from the pitot on the back. |
Posted By: MartyMabe
Date Posted: September-09-2022 at 6:47am
|
Looks like someone needs a PEF Plaque for their Dash! e-mail me mtmabe@northstate.net  ------------- 66 Skylark http://www.correctcraftfan.com/diaries/details.asp?ID=5041" rel="nofollow - 93 SN If you're not living in NC, you're just camping out! |
Posted By: WakeskateNW
Date Posted: September-09-2022 at 10:07am
|
lol ya ya thats exactly what you said the last time I posted that picture! To be honest I'm not sure where id put another one. The first PEF plaque I ordered from you is holding up just fine! thanks again Marty!
|