Starter
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=51052
Printed Date: March-02-2025 at 4:21pm
Topic: Starter
Posted By: wsavini
Subject: Starter
Date Posted: March-05-2023 at 7:31am
|
Hello, I’m looking for help to find a starter for a 1965 Ford 260. It’s n a CC Mustang. It has an actuator on the side the pushes in to engage the starter. Had this rebuilt once a couple of years ago for 260 bucks but didn’t last very long. Can’t seem to find the matching starter. Any help is appreciated. Ty |
Replies:
Posted By: KENO
Date Posted: March-05-2023 at 12:10pm
|
Being an old Interceptor engine, I'd figure you have the big old Ford positive engagement starter like in the first picture It's most likely got 9 teeth and a nose cone depth of 2 3/8 inches like in the second picture, but if you could verify the depth and number of teeth that would be good to get one that fits and works  https://ibb.co/Gcs6x28" rel="nofollow">  https://ibb.co/vBSLYf1" rel="nofollow">  |