Print Page | Close Window

Sherwood G20 - Rebuild or replace?

Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=51146
Printed Date: May-02-2024 at 2:21am


Topic: Sherwood G20 - Rebuild or replace?
Posted By: NeilMcG
Subject: Sherwood G20 - Rebuild or replace?
Date Posted: May-23-2023 at 1:12am
 Got a Genuine Sherwood G20 RWP with a significant wobble fore/aft so clearly something has to be done. Rebuild kits are $75 or less and DJ ready to install pumps are $210.

After reading prior posts, it seems that rebuilding one is no easy thing and maybe not the best idea for a novice. Couldn't find a step by step guide anywhere. What's involved in a rebuild.?



__________________________________________________________________________
 
Boater's Tip #31 - A lawn chair and cooler at the boat ramp is a suprisingly amusing way to spend the day.




Replies:
Posted By: KENO
Date Posted: May-23-2023 at 8:33am
Here's a link to an old thread that also has a link or 2 in it to other threads 

http://www.correctcraftfan.com/forum/forum_posts.asp?TID=46865&title=sherwood-pump-help" rel="nofollow - link

After reading them, then you can decide if you want to spend the money on parts or get the new pump and slap it on  Wink


Posted By: NeilMcG
Date Posted: May-23-2023 at 11:59am
Originally posted by KENO KENO wrote:


Here's a link to an old thread that also has a link or 2 in it to other threads 

http://www.correctcraftfan.com/forum/forum_posts.asp?TID=46865&title=sherwood-pump-help" rel="nofollow - link

After reading them, then you can decide if you want to spend the money on parts or get the new pump and slap it on  Wink


That's the thread I was looking at, but can't access the links from a phone. I was hoping you'd reveal some ancient Chinese secret on the simplicity of it, but alas have to concede that it's not so. Not sure I have the appetite for a rebuild, so I think the barter route is next.


Posted By: KENO
Date Posted: May-23-2023 at 12:04pm
Like you said, just barter with somebody.............you give them 210 bucks, they ship you a pump Wink


Posted By: Gary S
Date Posted: May-23-2023 at 1:21pm
Ken brings up a good point, if you go with Sherwood prices your talking over 100 for parts alone then you have to have someone do it if you don't have the tools so 210 does not look so bad

-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS
95 Nautique Super Sport



Print Page | Close Window