Print Page | Close Window

98 Ski Nautique Back cover over gas tank

Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=51163
Printed Date: November-30-2024 at 4:25pm


Topic: 98 Ski Nautique Back cover over gas tank
Posted By: skimech
Subject: 98 Ski Nautique Back cover over gas tank
Date Posted: June-01-2023 at 8:47pm
Hello everyone,

I was wondering if someone here knew what the material is that is at the back of the boat. It is white, very thin, about 1/16" and was covered with carpet. Mine finally cracked up down the center and I am looking to replace.

Regards,

John 


-------------
John G.


Replies:
Posted By: Mpost
Date Posted: June-02-2023 at 9:21am
Are you talking about the vertical peice behind the seat back and the front of the tank???

-------------
84 SN Sold   98 SN    Lund Pro V   1975 Alumacraft

Posted By: skimech
Date Posted: June-02-2023 at 10:46pm
Yes, the vertical piece between the seat and gas tank.

-------------
John G.

Posted By: malcolm2
Date Posted: June-24-2023 at 12:56pm
If it is UHMW, you could splice it back together.  I have seen several youtube vids where people get wire and bend it in a zig zag pattern and heat it up and push it into the seam of the plastic.  do a bunch of those with some gorilla glue first.  Maybe that would work.


Print Page | Close Window