Print Page | Close Window

Alto Damper Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Engine Repair Forum Discription: Engine problems and solutions URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=51178 Printed Date: September-27-2024 at 5:20pm Topic: Alto Damper Posted By: 99airwarrior Subject: Alto Damper Date Posted: June-12-2023 at 3:07pm Hi are the Alto dampers any good for my 351w in my 2001 its list as DA 106 for the Velvet drive Thank You  Replies: Posted By: Wilhelm Hertzog Date Posted: June-12-2023 at 4:27pm Those are most commonly recommended on here, yes. Either the standard ALTDA-106 or the pre-trimmed ALTDA-106A (which I installed in my boat about two years ago): https://bpi.ebasicpower.com/shop/marine-transmissions-and-parts-borg-warner-velvet-drive-zf-hurth-paragon/borg-warner-velvet-drive-parts/drive-damper-flex-plate-marine-triangular-for-volvo-io-ford-and-gm-120-8-1446 P.S. Apologies about the 'dead' link above, but I'm posting from my phone. ------------- 1982 Ski Nautique PCM351W RR II Velvet Drive 10-17-003 1:1 II PerfectPass Stargazer Do not go gentle into that good night. Rage, rage against the dying of the light. Posted By: 99airwarrior Date Posted: June-12-2023 at 4:36pm Thank You Wilhelm for the information I did purchase the trimmed one. Going to install it when the Rain stops Joe

Print Page | Close Window