Pitot Stabilizers
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=51224
Printed Date: January-15-2025 at 12:50pm
Topic: Pitot Stabilizers
Posted By: trice
Subject: Pitot Stabilizers
Date Posted: July-03-2023 at 11:13pm
|
Replacing pitot tubing on an 85 SN. Is there a service/cleaning/operational check procedure for the inline brass stabilizers buried behind the gas tank? ------------- 87 SN |
Replies:
Posted By: KENO
Date Posted: July-04-2023 at 1:35pm
|
Not much you can do........blow air in one end and see if it comes out the other end. After that you can pressurize it to 25 to 30 psi and make sure air isn't leaking out anywhere. If the boat is going 50 mph, the pitot tube and speedometer are seeing about 30 psi, so there's no real need to go any higher for most boats
 |
Posted By: trice
Date Posted: July-04-2023 at 6:44pm
|
I will do all the above. Thanks Keno! ------------- 87 SN |