TN storm brought barn down on boat
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=51225
Printed Date: December-02-2024 at 12:43pm
Topic: TN storm brought barn down on boat
Posted By: rebel skier
Subject: TN storm brought barn down on boat
Date Posted: July-04-2023 at 5:46pm
|
In a bad luck cycle. I am in MS dealing with an aging parent and its not looking good. I got a message last night that the recent TN storms brought the barn where I store my boat down. Not sure when I can get back and deal with. The storms pushed the barn back and it spared my windshield but a large beam is being supported by my boat right above the wheels. I cannot tell from the pics if its on the rear edge of the house or not. . https://ibb.co/2q00xDS" rel="nofollow">  https://imgbb.com/" rel="nofollow">  There is a pallet of cinder blocks. I figure we will stack them up and use a good bottle jack to get the wood up off the boat, and remove my trailer guides and pull it out from under. Just have to get things settled here first. Hoping for the best. ------------- Hotty Toddy lets go skiing! |
Replies:
Posted By: Gary S
Date Posted: July-04-2023 at 9:46pm
|
Oh man OUCH! Hope everything works out ok Rich. Bad enough for you when your there but now is tough. Good luck ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: Faceplant
Date Posted: July-05-2023 at 9:44pm
|
Makes my heart sink. Sorry to hear . ------------- Feels like I am hanging 10 but in reality - probably hanging 6. |
Posted By: GottaSki
Date Posted: July-06-2023 at 9:29am
|
Sorry, that sux you are probably already ahead of me, but after shoring up the beam, consider unbolting the guidepoles, then you only have to lift the mess about 6" to get the boat out ------------- "There is nothing, absolutely nothing, half so much worthwhile as messing around with boats...simply messing." River Rat to Mole |
Posted By: 67 ski nat
Date Posted: July-06-2023 at 9:51am
|
Hopefully you’ll get lucky with no damage I like gotta ski idea |
Posted By: rebel skier
Date Posted: July-10-2023 at 11:21am
|
I got lucky and they made one hell of a strong hull in 1985. My cover has holes in it where the beam laid on top of my boat, but there are no scratches or structural damage. I did like Tom suggested, and removed the trailer poles so that I did not have to jack up the roof support beam as high. This is the extent of the damage to my boat (and I hope that after a few sunny days it might pop out): https://ibb.co/4gGZW72" rel="nofollow">  ------------- Hotty Toddy lets go skiing! |
Posted By: Jonny Quest
Date Posted: July-10-2023 at 11:57am
|
Go buy a lottery ticket NOW! ------------- Current 2003 Ski Nautique 206 Limited Previous 2001 Ski Nautique Open Bow 1994 Ski Nautique Open Bow Aqua skiing, ergo sum |
Posted By: Morfoot
Date Posted: July-10-2023 at 1:06pm
        Dude....talk about lucky... +1 on what JQ said! ------------- "Morfoot; He can ski. He can wakeboard.He can cook chicken.He can create his own self-named beverage, & can also apparently fly. A man of many talents."72 Mustang "Kermit",88 SN Miss Scarlett, 99 SN "Sherman" |
Posted By: GottaSki
Date Posted: July-10-2023 at 1:41pm
|
Outstanding! ------------- "There is nothing, absolutely nothing, half so much worthwhile as messing around with boats...simply messing." River Rat to Mole |
Posted By: MrMcD
Date Posted: July-10-2023 at 5:03pm
|
In a bad situation you got off easy! Hope the folks are OK. ------------- |
Posted By: 67 ski nat
Date Posted: July-10-2023 at 7:36pm
|
Holy moly Lucky dawg Better sell it to me before any thing bad happens again. |
Posted By: rebel skier
Date Posted: July-25-2023 at 3:48pm
|
I dodged one bullet but the next one got me. Heading to the lake to run the boat and put it in a new storage area and have a hub bearing go out on me. I will need a new axle -- the shop where I towed it does not like to weld new spindles on. It is the side that took most of the weight of the barn, but I do not think this caused it. I had these bearings redone by a shop that is no longer in business 3 years ago. I should have checked them this year. So, the only thing holding the wheel on for the last 100 feet is the grove warn into the Goodyear Endurance tire. That tire is still holding 80 psi after that -- impressive. https://ibb.co/Db0k8XF" rel="nofollow">  https://ibb.co/gD0Kkdq" rel="nofollow">  ------------- Hotty Toddy lets go skiing! |
Posted By: gun-driver
Date Posted: July-26-2023 at 12:09am
|
Been there done that, except mine sheared the lugs off. Can’t figure how it happened, just had the wheels off to service the hubs and check the brake pads before the trip. https://ibb.co/hCV83Yx" rel="nofollow">  https://ibb.co/1MKpM1y" rel="nofollow">  |
Posted By: rebel skier
Date Posted: February-15-2024 at 8:50am
|
Hopefully closing this chapter from my crummy 2023 today. The custom torsion axle from Dexter is installed. Taking off from work to go get today. I hope I am happy. Trailer guy says it came out really nice. If worthy I will create a new thread about the trailer solution. ------------- Hotty Toddy lets go skiing! |