Uneven boat ramp
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Common Questions
Forum Discription: Visit here first for common questions regarding your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=51243
Printed Date: November-21-2024 at 1:59pm
Topic: Uneven boat ramp
Posted By: ChrisNautique
Subject: Uneven boat ramp
Date Posted: July-15-2023 at 9:28am
|
In a perfect world with level boat ramp my 97 nautique loads perfect with fenders in water with just top showing. however on uneven ramp boat is off. Question... when ramp uneven should i put the high side fender in water with top showing or the lower side fender??? if lower side has fender in water with top showing the other side fender is about 3 inches out of water. TIA ------------- Chris |
Replies:
Posted By: KENO
Date Posted: July-15-2023 at 5:40pm
Sounds like one of those situations where you try one way and try the other way and see what works best with your particular trailer 
|
Posted By: samudj01
Date Posted: July-18-2023 at 11:16am
|
We have an uneven ramp and have found that kicking the trailer to the side at the last helps even it out. To be more clear, looking from the lake the ramp slopes a bit right to left. Trailer backs down and at the very bottom trailer is kicked out left. Doesn’t fix but makes it much better. ------------- 78 Ski Tique, 72 Skier w/302's, 93 SN w/351 & 17 GS22 w/zr409 Previous - 99 Sport Nautique w/GT40 and 87 Martinique w/351 |