Southwind pylon
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=51347
Printed Date: May-15-2024 at 8:16pm
Topic: Southwind pylon
Posted By: DenDen
Subject: Southwind pylon
Date Posted: August-29-2023 at 11:15pm
|
Looking for a Southwind pylon for an 18 footer. 1975 if it makes a difference. I would take anything that would work . I have a machine shop next door neighbor that can make anything. Sooooo a good description or blueprint would be great. |
Replies:
Posted By: ScottZ
Date Posted: September-16-2023 at 6:23am
|
I may be able to help you out on one. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: ScottZ
Date Posted: September-20-2023 at 5:07am
  
------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: ScottZ
Date Posted: September-20-2023 at 5:09am
|
The first picture is a pylon out of a Southward 20. The second two is one out of a 1986 Martinique. (ring and finger have been cut off) ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: DenDen
Date Posted: September-20-2023 at 5:24am
|
Thanks Scott, As I remember the one in my 20 foot SW was straight. I was thinking the one in an 18 foot would have to be bent? However, this brings up another interesting point, in my older, 75SW, why would I not want to build a motor frame like they show in the Martinique? Does anyone have any input on that? |
Posted By: ScottZ
Date Posted: September-20-2023 at 5:34am
|
You can buy this motor cradle if you want it. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: DenDen
Date Posted: September-20-2023 at 6:08am
https://ibb.co/9sCpRQP" rel="nofollow"> https://nonprofitlight.com/ca/los-angeles/charles-r-drew-university-of-medicine-and-science" rel="nofollow - charles r drew university |
Posted By: DenDen
Date Posted: September-20-2023 at 6:10am
|
Finally figured out the photos again. Note how this one is bent at the bottom to clear the seat? At any rate, I believe this is what I need and I’m still looking for. This picture is from Facebook and I can’t seem to get this guy to sell. |
Posted By: ScottZ
Date Posted: September-20-2023 at 6:11am
|
Is that a Mustang or a Martinique? ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: ScottZ
Date Posted: September-20-2023 at 6:19am
|
That pylon would be too short. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: DenDen
Date Posted: September-20-2023 at 9:57am
|
The guy on Facebook says he’s putting out a 76 SW 18. That may not be the picture. (sometimes I get confused) I will double check. Thanks for that advice I hadn’t thought about the height. |
Posted By: DenDen
Date Posted: November-06-2023 at 5:42am
https://ibb.co/QJP09LT" rel="nofollow"> Here is where I am on this project. Wil hopefully post end result on my other post: 75 SW restoration. |