Print Page | Close Window

'97 Ski Nautique - Replacing Coaming panels

Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=51471
Printed Date: October-11-2024 at 8:26pm


Topic: '97 Ski Nautique - Replacing Coaming panels
Posted By: nhhandyman
Subject: '97 Ski Nautique - Replacing Coaming panels
Date Posted: February-12-2024 at 11:25am
Put all new skins on (well, had someone else do it) and when removed the sides (coaming?) on each screw there was a 'dab' of what seemed like hot glue.

I assume this was there to stop the nut from backing off.

On the re-install, should i attempt to do the same using a hot glue gun?





Replies:
Posted By: KENO
Date Posted: February-13-2024 at 7:24am
I'm not sure I'd say anything was necessary, but a dab of RTV would do the same thing as the hot glue and be easier to do.


Posted By: nhhandyman
Date Posted: February-13-2024 at 7:28am
I agree the hot glue gun didn't seem like a great task to take on (kind of messy and you'd need to protect the carpet on the sides).

I'll put something on them - don't want them rattling off - they held fast since '97 !



Print Page | Close Window