Print Page | Close Window

Grinding and Engine Stall

Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=51512
Printed Date: November-21-2024 at 8:26pm


Topic: Grinding and Engine Stall
Posted By: TreeMan
Subject: Grinding and Engine Stall
Date Posted: March-27-2024 at 10:33am
Hello,

I have a '94 SNOB without the GT40 and right at the end of last season, I went to take the boat out of the slip and heard a grinding noise that was quickly followed by an engine stall out. I restarted and tried again.. Same result. I put the boat away knowing that I have a potential monster lurking for me this spring.. Someone tell me if this is a transmission replace/rebuild or something simpler? Hoping for something nice like throttle cable adjustment but expecting the worst. 

At the edge of my seat, 
Steve


Replies:
Posted By: GottaSki
Date Posted: March-27-2024 at 1:05pm
You are describing clanking of the driveline due to poor idle quality. Correct the idle, the symptom should alleviate

-------------
"There is nothing, absolutely nothing, half so much worthwhile as messing around with boats...simply messing."

River Rat to Mole


Print Page | Close Window