Print Page | Close Window

gt 40 injector removal ?

Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=51546
Printed Date: November-21-2024 at 8:48pm


Topic: gt 40 injector removal ?
Posted By: malibud
Subject: gt 40 injector removal ?
Date Posted: April-28-2024 at 11:29am
I have one leaky injector 1st one behind the drivers seat. I searched but....
Does the intake have to come off or can I slide it in ? thanks !


Replies:
Posted By: Jonny Quest
Date Posted: April-28-2024 at 3:27pm
It is MUCH easier if you remove the intake manifold.  As long as you are working on the EFI system, a new fuel pressure regulator may be a good idea -- fairly inexpensive and may save headaches down the road.

What are you going to do for the injector replacement?  If you buy a PCM injector, they are quite expensive.  The FoMoCo part number for the same injector is: F1TE-D5A.  These can be expensive.  You can upgrade to new injectors for under $250.

Ford Performance 24 lb injectors.
https://www.summitracing.com/parts/fms-m-9593-lu24a

You will also need some EV6 to EV1 adapters so that the new injectors work with the existing wiring.
https://www.summitracing.com/parts/btc-ev1ev68

JQ




-------------
Current
2003 Ski Nautique 206 Limited

Previous
2001 Ski Nautique Open Bow
1994 Ski Nautique Open Bow

Aqua skiing, ergo sum

Posted By: malibud
Date Posted: April-29-2024 at 8:51am
Hey thanks Jonny ! huge help ... hopefully I'll be able to pass on the knowledge... 


Print Page | Close Window