1989' SN 2001, dash harness wanted
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=51547
Printed Date: November-21-2024 at 3:56pm
Topic: 1989' SN 2001, dash harness wanted
Posted By: Ms Charlie
Subject: 1989' SN 2001, dash harness wanted
Date Posted: April-28-2024 at 1:46pm
| Does anyone know where I can find a new dash wiring harness for my boat? |
Replies:
Posted By: TRBenj
Date Posted: April-29-2024 at 2:23pm
| I don’t think anything premade exists (new), unless you’re looking for something from a parts boat. I may have something for a ‘90, feel free to pm me if that’s what you’re looking for. Otherwise you can probably buy an 8-pin harness and make your own. |
Posted By: Ms Charlie
Date Posted: April-29-2024 at 4:20pm
|
Thanks for getting back to me! I'm in a jam here. The wiring that I'm looking for goes to all of the gauges, ignition , stereo, etc. The problem I'm having is that they don't make these anymore. I need the harness with the original harness connectors to attach to the already existing in the boat. I'm not sure if I'm making any sense. I'm trying. |
Posted By: samudj01
Date Posted: April-29-2024 at 11:31pm
|
Tim is saying he doesn’t think those harnesses with the correct matching plugs exist to buy new. Sounds like he may have a used one you could buy. Or you could buy a harness from ebasicpower and put new matching wire plugs on the engine and dash sides. If those specific plug ends aren’t available, buy new harness, cut off all 4 plugs, and install 4 new generic plugs. ------------- 78 Ski Tique, 72 Skier w/302's, 93 SN w/351 & 17 GS22 w/zr409 Previous - 99 Sport Nautique w/GT40 and 87 Martinique w/351 |
Posted By: Ms Charlie
Date Posted: April-30-2024 at 12:17pm
|
Thank you so much for all of that info. Im flailing here to get this done. Ive given this mission to a stranger to try to fix. He's an electrical engineer that answered my help needed as. I gave him all of the old balled up dash wiring, but he hasn't any experience in this sort of thing. It looks bleak. M20 in San Diego wanted to charge me $4400 to make a whole new harness for it. ($200 an hour for an estimated 16 hours of work.) I know zero about wiring. I need a miracle. |
Posted By: Ms Charlie
Date Posted: April-30-2024 at 2:07pm
| I'd like to buy a used one. At least it'll be uncut with the harness plugs still attached.. |
Posted By: Ms Charlie
Date Posted: April-30-2024 at 2:09pm
| How do I contact the right person? |
Posted By: KENO
Date Posted: April-30-2024 at 4:37pm
Send a PM through the site to TRBenj, who posted earlier that he might have a 1990 harness. What do you have right now for harness pieces, remains etc?
|
Ms Charlie wrote: