PCM 351w parts/accessories
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=51561
Printed Date: November-21-2024 at 9:32am
Topic: PCM 351w parts/accessories
Posted By: TRBenj
Subject: PCM 351w parts/accessories
Date Posted: May-08-2024 at 4:59pm
|
We have a few PCM 351w’s here that we are in the process of disassembling- came to us cracked, etc. If anyone has any need for parts, drop me a line. Can ship on your dime. TRBenj@gmail.com |
Replies:
Posted By: pschoenfeld
Date Posted: May-23-2024 at 5:05pm
| Would you happen to have a fuel tank for a 1994 Ski Nautique? Thanks |
Posted By: TRBenj
Date Posted: May-30-2024 at 3:26pm
|
Bump. Jody, let me know if you still want the oil pan/pickup and timing cover. |
Posted By: Hellerides
Date Posted: June-07-2024 at 6:18pm
|
Hey Grand Poobah, I'm in need of a '91 clean intake, or as clean as possible. Mine seems to have rusted through between the water passage and the intake passage. I'm almost certain of this because, the exhaust manifolds are new and after the the engine stalled and was hard to start a few times. The last time it happened, it would not turn over at all. Found #2 cylinder full of water and all the cylinders had a small amount of water. Thanks, hellerides ------------- Billy |
Posted By: Hellerides
Date Posted: June-10-2024 at 2:51pm
|
To: TRBenj, In reply to your post (PCM 351w parts/accessories). Do you have a 12 bolt intake manifold for a 351w in a 1991 sport nautique? It has a carburetor. I believe mine has rusted through and allowed water to get into the #2 cylinder, although I found a little water in all the cylinders. My email is mulletrace53@gmail.com Thank You, Billy (hellerides) ------------- Billy |
Posted By: TRBenj
Date Posted: June-10-2024 at 3:58pm
|
Billy, I wish you had inquired a few weeks ago as I just sent 2 to the scrap yard. I couldn’t have promised they were good though, and they certainly weren’t light… I just replied to your email- an edelbrock performer is a good aftermarket option. |
Posted By: Hellerides
Date Posted: June-10-2024 at 7:26pm
|
Thanks Tim ------------- Billy |
Posted By: Jonny Quest
Date Posted: June-11-2024 at 2:35pm
|
I had a Performer RPM intake on my 1994…very nice results. ------------- Current 2003 Ski Nautique 206 Limited Previous 2001 Ski Nautique Open Bow 1994 Ski Nautique Open Bow Aqua skiing, ergo sum |
Posted By: MurphyCO
Date Posted: June-17-2024 at 4:54pm
I need an alternator bracket for my 99 GT 40. Need a bracket to modify because of the alternator upgrade that has my pulleys mis- aligned. Any chance you have one? Gary
|
TRBenj wrote:Posted By: KENO
Date Posted: June-17-2024 at 6:55pm
|
Is this the same continuing battle with belt alignment from 3 years ago? I thought you found/ordered a bracket back then. Then again, I also see in a later thread that it was unavailable.
|
Posted By: MurphyCO
Date Posted: June-18-2024 at 8:38am
Unfortunately, I was unable to find the bracket, and don't really want to attempt surgery without a backup. The engine squeals pretty noticeably on start up, so I know I need to fix it. Nautique parts said they would help solve it, but after a few emails they quit writing as well. I keep spare belts in the boat along with tools to change and hope for the best. Annoying.
|